Aventura Technologies VENDOMA-MPG Guide d'installation télécharger pdf (Page 13)

VENDOM

1 Connect Audio Input cable

2 Connect BNC cable

3 Connect Back panel cable

4 Connect Sensor Relay cable

5 Connect Watch dog cable

Assembly View

Note:

1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the

Reset pin of the PC’s motherboard. The Reset switch from the PC must be plugged in next

to the Watchdog on the DVR card.

2. If the Watchdog cable and/or the Reset switch are connected incorrectly, the system will not

reboot and you may not have video. Try reconnecting the pins to restore the video.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 30 31

Pas de commentaire

Aventura Technologies VENDOMA-MPG Guide d'installation Page 13